Adding an extender Chain
Material: 101014 2 inch extender ( 3x4 mm strong cable chain), 20 gauge 4mm jumpring, chain for anklet (101003), lobster clasp
Tools: Chain nose pliers, bent chain nose pliers
Adding an extender chain to a finished bracelet or necklace can make a big difference in the finished product. Some necklaces, for instance, are purchased with layering in mind so the wearer may want to change the length of the necklace while pairing it with different chains. Perhaps a necklace or bracelet just does not fit quite right or you are looking for a way to add a little something extra to the piece. Extender chains have multiple purposes and can enhance the allure of the piece. An extender chain should be wide enough for the clasp to grip onto it, but not too thick or heavy. Ideally a cable chain 3x4 or 4x4mm wide.
Step 1: Cut the extender chain to your desired length, approximately 1-2 inches. If you would like, you can add a tiny charm, bead or pearl to the end of the extender.
Step 2: Identify the end of the chain opposite the closing clasp. If is it an open jump ring, open it. If it is soldered close, add another jump ring.
Step 3: Add the extender chain to the open ring, and close up the ring.
Now your chain can be close up to 1-2inch long than the primary length.
Beadunion